This site uses cookies and by using the site you are consenting to this. Find out why we use cookies and how to manage your settings HERE

RE:SURE CCTV Monitoring Swan Point & Old Summerhill Building

Aug 11, 2022
RE:SURE CCTV Monitoring Swan Point & Old Summerhill Building

Case Study: RE:SURE CCTV Monitoring Swan Point & Old Summerhill Building.

As a business owner there is often a continual worry of someone breaking into your property. There can be few things that are more frustrating than having to watch people breaking into your business, as you review your footage from your CCTV in the aftermath of a crime.

With RE:SURE, you can eliminate these worries. RE:SURE Monitoring works in conjunction with Power Right installing a new CCTV System or utilizing your existing CCTV System to stop the damage before it is done. They specialize in protecting any commercial property and special in high-risk premises such as construction sitespetrol stations and car dealerships.

The following Project outlines a Security Solution installed to PSA 2006:12 Standards by a Private Security Authority Licensed company.

Products
  • IP and Analogue CCTV System (We can use both)
  • Camect’s powerful smart camera hub
  • Audio Equipment for Audio warnings and challenges
Installation

Once Power Right identified what was required for both sites we went to work.

For Swan Point, we installed a new IP System with a mixture of IP Bullets and Turret Cameras. We also installed 2 Way Audio Speakers so that intruders once detected could be challenged.

For the Summerhill old building, they had an existing Analogue system in place which we reused.

For both sites, a Camect’s smart camera hub was installed and connected to the CCTV Systems to analyze the existing video footage in real-time to detect and label moving objects including people, vehicles, and deliveries.

RE: SURE’s 24-7 monitoring center, combined with Camect’s analytics, provides more accurate and responsive security monitoring for their client's homes and businesses.

Software for the End User - RE:SURE I/O & RE:SURE GO

RE: SURE I/O removes the keypad for arming & disarming your CCTV Monitoring System. With a host of features to make your life easier, having RE: SURE I/O means you will never again forget to arm your security system. Not only that, but you will have complete visibility of who armed and disarmed your system, and when.

RE:SURE GO quickly and easily turns your employees’ existing smartphones into a personal panic alarm and lone worker app. This will provide them with immediate GPS Coordinates and video and audio clips of any incident.

Testimonials

“Power Right and RE: SURE gave us a complete security solution which removed the need for a guard at our building and replaced it with a Remote Access Control solution. We now have a more cost-effective solution that gives us complete confidence. We now have lower overheads & secure 24-7 site access. ”

Michael O’Hehir

Owner Swan Point

“When we got broken into and watched how the break-in unfolded, it dawned us that our CCTV system wasn’t helping us. With minimal effort and spend, RE:SURE have turned our existing passive CCTV into an active system that has since prevented potential further break-ins and hence saved us a small fortune. ”

Nick Wright

Owner Summerhill Old Building

 

 

 

 

 

 



Read Next...